Liquids
Convert teaspoons of half and half to grams
One teaspoon of half and half weighs about 5.04 g, and half a teaspoon comes to roughly 2.52 g. Enter any amount below to convert it, or use the chart further down as a quick reference while you cook.
1 tsp of half and half =
5.04 g
- oz
- 0.178
- kg
- 0.0050
- lb
- 0.011
Half and Half: 242 g per US cup · USDA FoodData Central. Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Full half and half chart →Half and Half at a glance
Every number on this page comes from a single figure: 242 grams per US cup (USDA FoodData Central).
- 1 cup
- 242 g
- 1 tablespoon
- 15.1 g
- 1 teaspoon
- 5.04 g
- 1 cup in ounces
- 8.54 oz
- 100 g in cups
- 0.413 cups
- Density
- 1.02 g/ml
teaspoons to grams chart for half and half
Print it, screenshot it, or bookmark this page — these are the amounts recipes ask for most often. Every row is 242 g per US cup scaled to the teaspoonsyou entered.
| Teaspoons (US) | Grams | Ounces (weight) | Pounds |
|---|---|---|---|
| 1/4 tsp | 1.26 g | 0.044 oz | 0.0028 lb |
| 1/2 tsp | 2.52 g | 0.089 oz | 0.0056 lb |
| 3/4 tsp | 3.78 g | 0.133 oz | 0.0083 lb |
| 1 tsp | 5.04 g | 0.178 oz | 0.011 lb |
| 1 1/2 tsp | 7.56 g | 0.267 oz | 0.017 lb |
| 2 tsp | 10.1 g | 0.356 oz | 0.022 lb |
| 3 tsp | 15.1 g | 0.534 oz | 0.033 lb |
| 4 tsp | 20.2 g | 0.711 oz | 0.044 lb |
| 6 tsp | 30.3 g | 1.07 oz | 0.067 lb |
| 8 tsp | 40.3 g | 1.42 oz | 0.089 lb |
One teaspoon of half and half, in every unit
The same single teaspoon expressed in the units recipes actually use, with the nearest fraction a measuring set can give you. Every figure below comes from the same242 g per US cup density, so they all move together when the cup size changes.
| Unit | Equivalent | Nearest cookable measure |
|---|---|---|
| Cups (US) | 0.021 cup | 0 cup |
| Tablespoons (US) | 0.333 tbsp | 1/3 tbsp |
| Fluid Ounces (US) | 0.167 fl oz | 1/8 fl oz |
| Millilitres | 4.93 ml | 4 7/8 ml |
| Ounces (weight) | 0.178 oz | — |
| Grams | 5.04 g | — |
Half and Half vs other liquids
Same teaspoon, different density — half and half works out at 242 g per US cup, which is why a blanket “1 cup = 240 g” rule fails across a category.
| Ingredient | 1 tsp in g | g per cup | vs half and half |
|---|---|---|---|
| Half and Halfthis page | 5.04 g | 242 | — |
| Water | 4.94 g | 237 | 2% lighter per cup |
| Milk | 5.08 g | 244 | weighs the same per cup |
| Buttermilk | 5.1 g | 245 | weighs the same per cup |
How this conversion is calculated
Volume-to-weight conversions are only as good as the density behind them. We treat half and half as 242 g per US customary cup, which works out to 1.023 g/ml. From there:
- Your teaspoons figure is converted into millilitres or grams using standard unit sizes (tsp = 4.93 ml).
- Multiplying that volume by the 1.023 g/ml density is the entire conversion — nothing else moves the number.
- The result is rounded the way a cook would round it: to the nearest gram, or to a usable fraction such as 0 teaspoons. Nothing is lost by rounding a g figure to the gram — a kitchen scale does not resolve below 1 g.
Measuring half and half accurately
Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Teaspoons are the least accurate measure in the kitchen — a level teaspoon varies by up to 15% between people, whether you are spooning in a powder or pouring a liquid. Use this page for small amounts of half and half where precision does not matter, and a 0.1 g scale where it does.
A US cup is 236.6 ml, a metric cup is 250 ml and an imperial cup is 284 ml — a 20% spread across three books that all say "one cup". For half and half specifically, the 242 g figure is a poured-and-read-at-eye-level measure, and 1.023 g/ml is what every row on this page is built from.
242 g per cup works out at 1.023 g/ml, close enough to water that the usual volume rules mostly hold — until the ingredient is broken up, whipped or aerated, at which point the same cup holds far less.
Where the number goes wrong
Three things account for almost every bad result people get from this conversion — and all three of them are about how you put half and half into the cup, not about the arithmetic.
- Leaving half and half behind on the walls of the cup or the spoon — even thin liquids lose 5–10% of a measured cup this way.
- Pouring into the cup and then topping it up to the brim. A cup filled to the very top is about 8% more than a cup filled to the line, and the overflow is the part that goes on the counter.
- Treating the result as exact: the density behind it (1.023 g/ml) is an average, and real batches vary several percent either way.
If the bake matters — bread, macarons, anything with a tight hydration or ratio — weigh it. A cheap digital scale removes the largest single source of variation in home baking, and it is faster than washing three measuring cups. For half and half specifically, weighing removes the difference between the 242 g figure and whatever your particular brand and technique actually delivers.
Frequently asked questions
How many grams are in 1 teaspoon of half and half?
1 teaspoon of half and half is 5.04 g. This is based on a density of 242 g per US cup.
How many grams are in 2 teaspoons of half and half?
2 teaspoons of half and half is 10.1 g, and 2.52 g for half a teaspoon.
How much is 100 g of half and half in cups?
100 g of half and half is about 3/8 cups. Weight is always the more reliable measurement, so use a scale when the recipe gives grams.
Why do other sites give a different number for half and half?
Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Do UK and Australian cups give the same result?
No. A US customary cup is 236.6 ml, an Australian metric cup is 250 ml and an imperial cup is 284 ml, so "one cup" means three different volumes before you even reach the density. This page assumes 236.6 ml, and half and half works out at 1.023 g/ml against it.