Liquids
Convert millilitres of half and half to grams
One millilitre of half and half weighs about 1.02 g, and half a millilitre comes to roughly 0.511 g. Enter any amount below to convert it, or use the chart further down as a quick reference while you cook.
1 ml of half and half =
1.02 g
- oz
- 0.036
- kg
- 0.0010
- lb
- 0.0023
Half and Half: 242 g per US cup · USDA FoodData Central. Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Full half and half chart →Half and Half at a glance
Every number on this page comes from a single figure: 242 grams per US cup (USDA FoodData Central).
- 1 cup
- 242 g
- 1 tablespoon
- 15.1 g
- 1 teaspoon
- 5.04 g
- 1 cup in ounces
- 8.54 oz
- 100 g in cups
- 0.413 cups
- Density
- 1.02 g/ml
millilitres to grams chart for half and half
Print it, screenshot it, or bookmark this page — these are the amounts recipes ask for most often. Every row is 242 g per US cup scaled to the millilitresyou entered.
| Millilitres | Grams | Ounces (weight) | Pounds |
|---|---|---|---|
| 15 ml | 15.3 g | 0.541 oz | 0.034 lb |
| 30 ml | 30.7 g | 1.08 oz | 0.068 lb |
| 50 ml | 51.1 g | 1.8 oz | 0.113 lb |
| 60 ml | 61.4 g | 2.16 oz | 0.135 lb |
| 100 ml | 102 g | 3.61 oz | 0.226 lb |
| 120 ml | 123 g | 4.33 oz | 0.271 lb |
| 150 ml | 153 g | 5.41 oz | 0.338 lb |
| 200 ml | 205 g | 7.22 oz | 0.451 lb |
| 240 ml | 245 g | 8.66 oz | 0.541 lb |
| 500 ml | 511 g | 18 oz | 1.13 lb |
One millilitre of half and half, in every unit
The same single millilitre expressed in the units recipes actually use, with the nearest fraction a measuring set can give you. Every figure below comes from the same242 g per US cup density, so they all move together when the cup size changes.
| Unit | Equivalent | Nearest cookable measure |
|---|---|---|
| Cups (US) | 0.0042 cup | 0 cup |
| Tablespoons (US) | 0.068 tbsp | 1/8 tbsp |
| Teaspoons (US) | 0.203 tsp | 1/4 tsp |
| Fluid Ounces (US) | 0.034 fl oz | 0 fl oz |
| Ounces (weight) | 0.036 oz | — |
| Grams | 1.02 g | — |
Half and Half vs other liquids
Same millilitre, different density — half and half works out at 242 g per US cup, which is why a blanket “1 cup = 240 g” rule fails across a category.
| Ingredient | 1 ml in g | g per cup | vs half and half |
|---|---|---|---|
| Half and Halfthis page | 1.02 g | 242 | — |
| Water | 1 g | 237 | 2% lighter per cup |
| Milk | 1.03 g | 244 | weighs the same per cup |
| Buttermilk | 1.04 g | 245 | weighs the same per cup |
How this conversion is calculated
Volume-to-weight conversions are only as good as the density behind them. We treat half and half as 242 g per US customary cup, which works out to 1.023 g/ml. From there:
- Your millilitres figure is converted into millilitres or grams using standard unit sizes (ml = 1 ml).
- Multiplying that volume by the 1.023 g/ml density is the entire conversion — nothing else moves the number.
- The result is rounded the way a cook would round it: to the nearest gram, or to a usable fraction such as 0 millilitres. Nothing is lost by rounding a g figure to the gram — a kitchen scale does not resolve below 1 g.
Measuring half and half accurately
Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Millilitres are volume and grams are weight, so this conversion exists only because of density. For half and half the bridge is 1.023 g/ml — and because that is not 1.000, a millilitre and a gram are not interchangeable here.
A US cup is 236.6 ml, a metric cup is 250 ml and an imperial cup is 284 ml — a 20% spread across three books that all say "one cup". For half and half specifically, the 242 g figure is a poured-and-read-at-eye-level measure, and 1.023 g/ml is what every row on this page is built from.
242 g per cup works out at 1.023 g/ml, close enough to water that the usual volume rules mostly hold — until the ingredient is broken up, whipped or aerated, at which point the same cup holds far less.
Where the number goes wrong
Three things account for almost every bad result people get from this conversion — and all three of them are about how you put half and half into the cup, not about the arithmetic.
- Leaving half and half behind on the walls of the cup or the spoon — even thin liquids lose 5–10% of a measured cup this way.
- Pouring into the cup and then topping it up to the brim. A cup filled to the very top is about 8% more than a cup filled to the line, and the overflow is the part that goes on the counter.
- Treating the result as exact: the density behind it (1.023 g/ml) is an average, and real batches vary several percent either way.
If the bake matters — bread, macarons, anything with a tight hydration or ratio — weigh it. A cheap digital scale removes the largest single source of variation in home baking, and it is faster than washing three measuring cups. For half and half specifically, weighing removes the difference between the 242 g figure and whatever your particular brand and technique actually delivers.
Frequently asked questions
How many grams are in 1 millilitre of half and half?
1 millilitre of half and half is 1.02 g. This is based on a density of 242 g per US cup.
How many grams are in 2 millilitres of half and half?
2 millilitres of half and half is 2.05 g, and 0.511 g for half a millilitre.
How much is 100 g of half and half in cups?
100 g of half and half is about 3/8 cups. Weight is always the more reliable measurement, so use a scale when the recipe gives grams.
Why do other sites give a different number for half and half?
Roughly 12% fat, so it lands between milk and heavy cream in both density and richness.
Do UK and Australian cups give the same result?
No. A US customary cup is 236.6 ml, an Australian metric cup is 250 ml and an imperial cup is 284 ml, so "one cup" means three different volumes before you even reach the density. This page assumes 236.6 ml, and half and half works out at 1.023 g/ml against it.