Skip to content

Grains, Rice & Legumes

Convert millilitres of pearl barley to grams

One millilitre of pearl barley weighs about 0.845 g, and half a millilitre comes to roughly 0.423 g. Enter any amount below to convert it, or use the chart further down as a quick reference while you cook.

1 ml of pearl barley =

0.845 g

oz
0.03
kg
0.00085
lb
0.0019

Pearl Barley: 200 g per US cup · USDA FoodData Central. Dense and free-flowing, one of the heavier dry grains by volume.

Full pearl barley chart →

Pearl Barley at a glance

Every number on this page comes from a single figure: 200 grams per US cup (USDA FoodData Central).

1 cup
200 g
1 tablespoon
12.5 g
1 teaspoon
4.17 g
1 cup in ounces
7.05 oz
100 g in cups
0.5 cups
Density
0.85 g/ml

millilitres to grams chart for pearl barley

Print it, screenshot it, or bookmark this page — these are the amounts recipes ask for most often. Every row is 200 g per US cup scaled to the millilitresyou entered.

Pearl Barley — measured by volume
MillilitresGramsOunces (weight)Pounds
15 ml12.7 g0.447 oz0.028 lb
30 ml25.4 g0.895 oz0.056 lb
50 ml42.3 g1.49 oz0.093 lb
60 ml50.7 g1.79 oz0.112 lb
100 ml84.5 g2.98 oz0.186 lb
120 ml101 g3.58 oz0.224 lb
150 ml127 g4.47 oz0.28 lb
200 ml169 g5.96 oz0.373 lb
240 ml203 g7.16 oz0.447 lb
500 ml423 g14.9 oz0.932 lb

One millilitre of pearl barley, in every unit

The same single millilitre expressed in the units recipes actually use, with the nearest fraction a measuring set can give you. Every figure below comes from the same200 g per US cup density, so they all move together when the cup size changes.

One millilitres of pearl barley, in every unit
UnitEquivalentNearest cookable measure
Cups (US)0.0042 cup0 cup
Tablespoons (US)0.068 tbsp1/8 tbsp
Teaspoons (US)0.203 tsp1/4 tsp
Fluid Ounces (US)0.034 fl oz0 fl oz
Ounces (weight)0.03 oz—
Grams0.845 g—

Pearl Barley vs other grains, rice & legumes

Same millilitre, different density — pearl barley works out at 200 g per US cup, which is why a blanket “1 cup = 240 g” rule fails across a category.

One millilitres — Pearl Barley vs its neighbours
Ingredient1 ml in gg per cupvs pearl barley
Pearl Barleythis page0.845 g200—
White Rice (uncooked)0.782 g1858% lighter per cup
Brown Rice (uncooked)0.803 g1905% lighter per cup
Cooked White Rice0.668 g15821% lighter per cup

How this conversion is calculated

Volume-to-weight conversions are only as good as the density behind them. We treat pearl barley as 200 g per US customary cup, which works out to 0.845 g/ml. From there:

  1. Your millilitres figure is converted into millilitres or grams using standard unit sizes (ml = 1 ml).
  2. Multiplying that volume by the 0.845 g/ml density is the entire conversion — nothing else moves the number.
  3. The result is rounded the way a cook would round it: to the nearest gram, or to a usable fraction such as 0 millilitres. Nothing is lost by rounding a g figure to the gram — a kitchen scale does not resolve below 1 g.

Measuring pearl barley accurately

Dense and free-flowing, one of the heavier dry grains by volume.

Millilitres are volume and grams are weight, so this conversion exists only because of density. For pearl barley the bridge is 0.845 g/ml — and because that is not 1.000, a millilitre and a gram are not interchangeable here.

A recipe that does not say whether the grains are raw or cooked is a recipe to weigh twice — once before, once after. For pearl barley specifically, the 200 g figure is a level-but-not-pressed-down measure, and 0.845 g/ml is what every row on this page is built from.

200 g per cup works out at 0.845 g/ml, close enough to water that the usual volume rules mostly hold — until the ingredient is broken up, whipped or aerated, at which point the same cup holds far less.

Where the number goes wrong

Three things account for almost every bad result people get from this conversion — and all three of them are about how you put pearl barley into the cup, not about the arithmetic.

  • Pouring pearl barley straight from the container into the cup and pressing down on it. Coarse grains and flakes settle and compact, so a packed cup can run 10–15 g over a level one.
  • Letting the grains settle in the bag between scoops. pearl barley compacts as it is handled, so the last cup of a batch can be 10–15 g heavier than the first.
  • Treating the result as exact: the density behind it (0.845 g/ml) is an average, and real batches vary several percent either way.

If the bake matters — bread, macarons, anything with a tight hydration or ratio — weigh it. A cheap digital scale removes the largest single source of variation in home baking, and it is faster than washing three measuring cups. For pearl barley specifically, weighing removes the difference between the 200 g figure and whatever your particular brand and technique actually delivers.

Frequently asked questions

How many grams are in 1 millilitre of pearl barley?

1 millilitre of pearl barley is 0.845 g. This is based on a density of 200 g per US cup.

How many grams are in 2 millilitres of pearl barley?

2 millilitres of pearl barley is 1.69 g, and 0.423 g for half a millilitre.

How much is 100 g of pearl barley in cups?

100 g of pearl barley is about 1/2 cups. Weight is always the more reliable measurement, so use a scale when the recipe gives grams.

Why do other sites give a different number for pearl barley?

Dense and free-flowing, one of the heavier dry grains by volume.

Do UK and Australian cups give the same result?

No. A US customary cup is 236.6 ml, an Australian metric cup is 250 ml and an imperial cup is 284 ml, so "one cup" means three different volumes before you even reach the density. This page assumes 236.6 ml, and pearl barley works out at 0.845 g/ml against it.

Same conversion, other grains, rice & legumes